Posted 20 hours ago

Draper 34964 Ratchet Torque Wrench, 3/4" Square Drive, 65Nm-450Nm, 840mm Length , Blue

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Torque wrenches are extremely sensitive pieces of equipment, and as such you need to store them properly to keep the calibration intact. Most torque wrenches come with a case, and we highly recommend storing them in this case whenever you aren’t using them. Even better, since it’s a 3/8” torque wrench you don’t have to spend nearly as much compared to some of the other options on our list. But even for a typical 3/8” drive torque wrench this one by EPAuto is available for a great price, and that’s a big part of the reason it’s our top 3/8” drive option. Now that you know a little more about some of the best torque wrenches out there, it’s time to figure out which torque wrench is right for you. Not only that, but too many people get an excellent torque wrench only to ruin it because they don’t know how to care for it properly. The stakes are high with a torque wrench, which is why you don’t want to just trust any torque wrench and hope it’s doing the job correctly. That’s why we took the time to highlight ten of the best torque wrenches on the market today.

If you’re looking for a top-notch torque wrench you can rely on year after year, then you really should consider GearWrench’s Micrometer Torque Wrench. GearWrench is one of the top names in the industry, and with products like this torque wrench, it’s not hard to see why. It also has a wider range of torque specs, starting as low as 14.8 ft/lbs. And with a maximum torque of 147.5 ft/lbs, it’s more than capable of handling most larger jobs you’ll come across in a DIY setting. It uses a digital display and a buzzer-activated system that’s easy to use. Take a look at all the jobs you need a torque wrench for and all the recommended torque specs, and then match those numbers up with the torque wrench you’re looking at. If you need a wide range of torque specs, there’s a good chance a single torque wrench won’t be able to handle it all. Why? Because if you fail to adequately torque a bolt, it could work its way loose. Or, if you tighten it too much, you could cause costly damage. About torque wrenches from HalfordsA big factor in this cost is the size of the torque wrench. Torque wrenches with higher calibrations tend to cost a little bit more than smaller torque wrenches. And as an intermediate option, it has a price to match. You don’t have to break the bank to get this Lexivon Torque Wrench, but you’re also not spending pennies for something you know you’ll have to replace at some point down the road. While some mechanics and technicians swear they can “feel” when it’s at the right torque spec, there’s only one way to know for sure. And all it takes is one mistake for something to fail. Still, because torque wrenches lose their calibration over time, it’s extremely important that you take the time to calibrate them each year. That way when you go to use them, you know you’re getting the exact right torque spec on the bolt, which is the whole point of having a torque wrench in the first place. Using Your Torque Wrench Sometimes you need a torque wrench for a really big job. If that sounds like you, then you should consider this ¾” drive Neiko Pro torque wrench. With a ¾” drive and a minimum 100 ft/lb setting it’s not for smaller jobs, but you’re also not going to find another torque wrench on our list that can come anywhere near 700 ft/lbs.

Even better, it can handle non-stop use, which is great for mechanics technicians that use a torque wrench as a part of their job. It’s an important distinction, but it gives you far more precise results for jobs with lower torque values. This is common for jobs like head gaskets or even oil pans because they use smaller bolts with lower torque values. In that case, you’ll need to invest in multiple torque wrenches to properly torque everything down. While that can be a little frustrating, if you’re trying to save a little money the Pittsburgh Pro torque wrench set we highlighted above comes with three different torque wrenches that should be able to handle just about any job you have. Drive Size This will help protect your torque wrench, keep the calibration intact, and help it last year after year. Calibrating Your Torque Wrench And it’s also why it takes quite a bit to earn our nod as the best ½” drive torque wrench. This ACDelco ARM601 torque wrench is an outstanding mix of price and quality. While it’s far from the most affordable option on our list, it’s a great value considering it should last a lifetime.Now that you know a little more about what to look for in a torque wrench and how to care for one, now it’s time to learn a little bit about using them.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment