Posted 20 hours ago

Werner Two Section Aluminium Loft Ladder with Handrail

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Remove the bolts from the endcaps on the end of the ladder. Move the ladder up to the top of the swivel arms and align the holes in the swivel arms with the holes at the top of the ladder ends. Insert and tighten the bolts, then use an Allen key to tightly secure them.

Using a bradawl, create guide holes by pre-drilling pilot holes (around 2mm diameter) for all screws. Then use 35mm screws to fix it in place. Test that the ladder can now fully unfold and adjust accordingly. Before you use it, you must make sure the ladder is extended to create a fully straight line with the flat part of the feet touching the floor. If not, tighten the nuts at the top of the ladder until this is so. Screw these hinges in place using the holes provided onto the trapdoor and floor. Step eight: Open the ladder and fit the stowing ‘V’ rod This will depend on the floor-to-loft height. If you do need these, place the top stops over the holes at the rear frame of the ladder. Ensure they are around 150mm (six inches) below the permanent top stops.Then use a tape measure to find the distance from the bottom of the second section to the floor. This will help you identify how much you need to cut off from the ladder. YouTube sets this cookie to measure bandwidth, determining whether the user gets the new or old player interface.

Homeowners and professional fitters can benefit from fitting a FAKRO loft ladder. So how do you install one? You will need to get this separately. Once you have measured and cut a door to a suitable size, you can screw on the hinges provided to the shorter sides of the door. As you’ll see, we’ve included all the major brands, so from Youngman to FAKRO, Manthorpe and Werner, we’ve got you covered. Read on to find out more. YouTube sets this cookie to register a unique ID to store data on what videos from YouTube the user has seen.

4. Installation

You can now pass the catch operator through the trap door hole. Do this from the underside position. Make sure the pointer is pointing upwards towards the trapdoor edge. Then place the travel stop ring over the operator. Ensure the securing tag is at 45 degrees to the trapdoor centre line. So, how do you fit a loft ladder? Let’s help you with that! We have created a comprehensive guide to help make the installation process easier for you. You can use the existing cover as a template for the new piece. Make sure that as you cut the new piece out, there is a slightly loose fit around each edge of the cove, around 3mm (⅛ of an inch maximum). Apply caulk to fill the spaces. This will further minimise drafting and make for a neater appearance. Step six: Cut the ladder to length

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment